FINE MATERIAL WASHER 3625/4432

Offers a low-cost solution to sand/fines recovery after rinsing and passing through a washing screen.

4432t sandscrew hotspot
DIMENSIONS & WEIGHTS
3625S 3625T 4432S 4432T
Length (Metre) 8.6m (28’) 8.5m (28’) 10.5m (35’) 10.5m (35’)
Width (Metre) 2.6m (8’) 3.6m (12’) 3.6m (12’) 4.9m (16’)
Height (Metre) 3.9m (13’) 3.9m (13’) 4.8m (15’) 4.9m (16’)
MTPH 100 (90) 200 (130) 175 (159) 350 (318)
SANDSCREW 3625S Lippmann.165 1
WATER REQUIREMENTS PROCESS
Dry deck clearing water (water added at the top end of the screw) Rising current water in the back pool area of the screw washer
36″x25″ 44″x32″ 36″x25″ 44×32″
SINGLE TWIN SINGLE TWIN SINGLE TWIN SINGLE TWIN
USgpm @ 25psi 170 170 170 170 150 275 190 300
m3/h 38 38 38 38 34 62 43 68
SCREW WASHER CAPACITY
Sand Product passing 50 Mesh (0.3mm) Screw Speed Dewater Capacity Sand Product passing 50 Mesh (0.3mm) Screw Speed Dewater Capacity
≤ 15% 100% 100% ≤ 30% 50% 50%
≤ 15% 75% 75% ≤ 50% 25% 25%
REQUIREMENTS
3625S 3625T 4432S 4432T
Motor Power Recommended 15hp 15hp x 2 25hp 25hp x 2
Max Feed (MTPH) 100 (90) 200 (130) 100 (90) 200 (130)
Max Screw Speed 20rpm 20rpm 17rpm 17rpm
Estimated Operating Weights Lbs (Kg) 30,000 (13,600) 60,000 (27,215) 70,000 (31,751) 130,000 (58,967)
Water Capacity 100 mesh (149 micros) GPM (m3/h) 720 (163) 1250 (283) 1720 (390) 2800 (635)
Water Capacity 200 mesh (75 micros) GPM (m3/h) 180 (40) 360 (81) 425 (96) 700 (158)